A Proudly Canadian Company
Welcome, Login
With Your Vision & Our Products,
Anything's Possible
1-877-780-2722
With Your Vision & Our Products,
Anything's Possible
1-877-780-2722

Boat Cover Support System - 1 Pole

Part Number:MCS-1096
Boat Cover Support System - 1 Pole
Boat Cover Support System - 1 Pole
Your Price: $39.80

Availability:

Back Order

Choose Options

Support Pole Height
18" to 27"
27" to 47" (+$2.55)
39" to 70" (+$5.40)
Quantity Pricing
Quantity:
Price
  • 3 - 5
  • $35.82
  • 6 - 9
  • $33.83
  • 10+
  • $31.84

By using 1” webbing to anchor the telescoping support pole, 1 Pole Boat Cover Support System allows for the greatest support for preventing water pocketing on any boat cover. Once the boat cover support system is initially set up, repeating the install is a breeze by simply looping the webbing to the anchor points on the boat, pulling the loose end of the webbing making it taunt and then installing the cover. No need to worry about the support pole falling between uses. 1 pole boat cover support system for windshield back covers for runabout boats up to 28 feet.

Webbing:1.5 mm thick, 1” wide black polypropylene.

Webbing Break Strength: 575 lbs.

Cap Diameter: 3.5”

Cap Content: Nylon

Tube Diameter For Cap: 3/4”

System Includes: 1 adjustable cam lock support pole, 1 cap and 3 - 18' adjustable webbing straps.

Installation Instructions:

Step 1: Locate the longest strap. This strap is to be looped around the bow of the boat or a cleat near the bow.

Step 2: The remaining 2 straps are then anchored to the rear corners of the boat. You can use several options to anchor these straps such as cleats, transom eyes and even the aft corners of the boat. Adjust the straps to create a big or small loop.

Step 3: Using the adjustable webbing slides, adjust each of the three straps to create tension pulling against themselves from front to back and side to side. By manipulating the slides and adjusting the webbing, the pole support tree can be maneuvered into your desired location behind the windshield.

Step 4: Once the location of the support tree is in place, install an adjustable support pole and adjust to the desired height.

Step 5: Once adjusted you have the option to cut of the excess webbing. Make sure to singe the cut webbing with a hot knife or lighter to prevent the webbing from fraying.

Sold each.


Recently Viewed Items

Information Links
Browse By Category