Recommended for & endorsed by Sunbrella®. 303® High Tech Fabric Guard keeps fabrics fresh, soft, colorful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains. Use it to keep rugs clean, leather interiors fresh and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking. When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.
Cautions: Not recommended for plastic, vinyl, fiberglass or imitation suede. Make sure not to get over spray on floors, glass, paint, or clear vinyl. Keep away from spark, flame, and other sources of ignition. Follow all label instructions. Avoid breathing vapours. Avoid direct skin contact. Test for Colorfastness: Spray a hidden area. Wipe the sprayed area with a white absorbent cloth. If any color rubs off, DO NOT USE .
Coverage: 500-800 sq. ft. per gallon depending on material and application method.
Flammability: Extremely Flammable.
Instructions: Spray until evenly wet, overlapping sprayed areas. NOTE:
Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING:
6-12 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard™ will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
Ultraviolet: Extremely U.V. Stable.
Uses: Boating: enclosures, Biminis, dodgers, boat and sail covers. Commercial and residential awnings, outdoor furniture. RV: Acrylic awnings & furniture. Automotive "canvas" convertible topping. Product recommended by and for Sunbrella/Glen Raven Mills, Inc. and the Haartz Corporation.